Filter
Top Products
2-16
MS-9130 Workstation Mainboard
Fan Power Connectors: CFAN1/2, SFAN1/2, NBFAN1
The CAN1/2 (processor fan), SFAN1/2 (system fan) and NBFAN1
(Northbridge fan) support system cooling fan with +12V. It supports 3-pin
head connector. When connecting the wire to the connectors, always take
note that the red wire is the positive and should be connected to the +12V, the
black wire is Ground and should be connected to GND. If the mainboard has a
System Hardware Monitor chipset on-board, you must use a specially designed
fan with speed sensor to take advantage of the CPU fan control.
MSI Reminds You...
Always consult the vendors for proper CPU cooling fan.
NBFAN1CFAN1, CFAN2 SFAN1
SENSOR
+12V
GND
Fan Connector
Pin Definition
LCD Panel Connector: JLCD1
The connector is additionally provided for connection to a LCD panel,
which shows information on the panel for you to identify the current status or
mode of the connected system.
PIN SIGNAL
1 TX
2 RX
3 NC
4 GND1
5 GND0
6 VCC
JLCD1
1
2
56