MicroBoards Technology PF-2 Printer User Manual


 
Microboards Technology PF-2 PrintFactory
23
If the circle does not cross the circle at the zero’s, enter the vertical and horizontal numbers in
the Utility Tab.
Once the new numbers are entered, click Apply.
The Alignment CD pattern is also included on the PF-2 PrintFactory CD, so you can print
additional Alignment patterns with your printer, once it is aligned. The alignment circle is 8
cm in diameter and is 2 cm from the outer edge of the CD.
Loading Discs
The next step is to load your PF-2 PrintFactory with discs. The system will accept CD or DVD 12 cm
inkjet printable discs. If the disc does not have an inkjet printable surface, the ink will not adhere to
the surface of the disc. The PF-2 PrintFactory will only accept 12 cm discs. Business card or 8 cm
discs are not supported by this system.
Figure 1 Figure 2
Load the first 5 or 6 discs flat, as seen in figure 1.
Load the rest of the discs at an angle, as seen in figure 2.
The PF-2 PrintFactory will hold a maximum of 100 discs. DO NOT load more than 100 discs in the
system, as this will cause the discs to feed incorrectly.