Filter
Top Products
4.2 Remote Access
Users must setup the IP address with the local serial console port (RS-232
Port), and then use this IP address to control this VDSL switch via Telnet or
Web-Based UI. Otherwise, users can change the computer’s IP domain to be
the same as VDSL switch. Then use the default IP address to control this
VDSL switch.
4.2.1 Telnet
To enter Telnet, type the IP address of the switch to connect to management
system. Type the default username and password.
z Default Username: admin
z Default Password: 123
z For security purpose, users cannot login the console port and
telnet at the same time. It is necessary to log out of console port
before accessing the management UI via Telnet.
z Web-Based UI does not limit the number of users logged in.
4.2.2 Web-Based UI
The VDSL switch provides a web-based UI to manage and monitor the switch.
For changing IP address, users can use console port to modify it. Otherwise,
users can change the IP range and subnet of PC to match the default values
of the switch. The default values as follows:
z Default IP Address: 192.168.16.250
z Default Subnet Mask: 255.255.255.0
z Default Gateway: 192.168.16.1
z Default Username: admin
z Default Password: 123
11