Filter
Top Products
26
Power Management Setup Page
This page sets some of the parameters for system power management opera-
tion.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
ACPI Aware O/S Yes
Power Management Enabled
Suspend Time Out Disabled
Hard Disk Time Out Disabled
Ring On Power On Disabled
RTC Alarm Power On Disabled
RTC Alarm Date Every Day
RTC Alarm Hour 12
RTC Alarm Minute 30
RTC Alarm Second 00
KeyBoard PowerOn Function Disabled
Power On by LAN Disabled
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
ACPI Aware O/S
Enable this item if you are using an O/S that supports ACPI function such as
Windows 98/ME /2000.
Power Management
Use this item to select a power management scheme. Both APM and ACPI
are supported.
Suspend Time Out
This sets the timeout for Suspend mode in minutes. If the time selected
passes without any system activity, the computer will enter power-saving Sus-
pend mode.
Hard Disk Time Out
This sets the timeout to power down the hard disk drive, if the time selected
passes without any hard disk activity.
Ring On Power On
The system can be turned off with a software command. If you enable this
item, the system can automatically resume if there is an incoming call on the
Fax/Modem. You must use an ATX power supply in order to use this feature.
RTC Alarm Power On / Date / Hour / Minute / Second
The system can be turned off with a software command. If you enable this
item, the system can automatically resume at a fixed time based on the sys-
tem’s RTC (realtime clock). Use the items below this one to set the date and
time of the wake-up alarm. You must use an ATX power supply in order to use
this feature.