Filter
Top Products
Chapter 3 Installation
The MIL-S1000 can be installed quickly and easily.
However, for an installation with minimum impact on
the existing network, please read this chapter carefully.
Installing a MIL-S1000 involves three steps:
1. Choosing a location
2. Supplying power
3. Connecting the switch
Choosing A Location
The location of the switch is based on the following criteria:
" Avoid dusty locations.
" Avoid electromagnetic noisy areas, such as locations
close to power transformers or radio transmitters.
" Avoid temperatures below 32 Degrees Fahrenheit and
over 122 Degrees Fahrenheit.
" Allow a clear view of the front panel LED indicators.
" Allow easy access to the front panel ports and the rear
panel switches.
After choosing an appropriate location, you can install the