Filter
Top Products
21
4-2-1-3. Create VLAN Group
Enter “
c
” or “
C
” at the command prompt to access the Create VLAN Group
configuration interface.
VLAN group ID:
Enter the VLAN Group ID at the prompt.
Add VLAN group member:
Enter “
m
” or “
M
” at the command prompt to add
the port to the VLAN group, use the command “
+port number
” to add the port
or enter “
+A
” to add all ports. To remove the port from VLAN group, use the
command “
-port number
” or enter “
-A
” to remove all ports from group. A
maximum of 8 ports can be added to a VLAN group. After the port(s) are
added the VLAN group, enter command “
q
” or “
Q
” to exit the configuration
interface.