Filter
Top Products
26
4-3. QoS Control
Select QoS Control to access the QoS configuration menu. The system
supports two methods of QoS control – Port-Based and 802.1P/TOS.
From the Main Menu, enter "
q
" or "
Q
" to select QoS Control to enable or
disable the Qos function and set the high/low queue priority ratio.
Port-Based Enable:
Enter “
p
” or “
P
” at the command prompt to enable
Port-Based function.
802.1P/TOS Enable
: Enter “
e
” or “
E
” at the command prompt to enable
802.1P/TOS function.
Note:
Port-Based or 802.1P/TOS function must be anabled prior to
configuring the Priority ID Map function.
QoS Disable:
To disable QoS control, enter “
d
” or “
D
” at the command
prompt.