Filter
Top Products
105
Support Protocol-based VLAN
In order for an end station to send packets to different VLANs, it has to be
either capable of tagging the packets it sends with VLAN tags OR be
attached to a VLAN-aware bridge. The VLAN-aware bridge must be capable
of classifying and tagging the packet with different VLAN ID. The
classification and tagging of the packets is based on default PVID and other
information about the packet, such as the protocol.
MIL-SM2401M will support protocol-based VLAN classification by means of
both built-in knowledge of layer 2 packet formats used by selected popular
protocols, such as Novell IPX and AppleTalk’s EtherTalk, and some degree
of programmable protocol matching capability.
Create a VLAN and add tagged member ports to it.
1. Click the Add button to create a new VLAN group.
2. Enter the VLAN name, group ID and select the members for the new
VLAN.
3. Click the Apply button.
4. If the number of groups exceeds the limit for a single page, click the
NextPage button to view other VLAN groups.
NOTE: Use the Edit button to view and modify existing VLAN Groups.