Filter
Top Products
112
Information about the current spanning tree status is displayed in this
table.
The priority and path cost can be configured for each port. Click the Apply
button to modify the configuration.
Parameter Description
Port
Priority
A change to the Port Priority affects which port will be the root port.
The lowest number has the highest priority. The range is 0-255 and
the default setting for all ports is 128. If you change the value, you
must reboot the switch.
Path Cost
Path Cost specifies the path cost of the port that the switch uses to
determine which ports are the forwarding ports. The lowest
number becomes the forwarding port. The range is 1-65535 and
the default value is based on IEEE802.1D
10Mb/s = 50-600 100Mb/s = 10-60
If you change the value, you must reboot the switch.