Filter
Top Products
KVM.NET
44
9.2 Connecting to a Target server
To connect to a Target server:
From the Name list click the Target. The Target’s screen appears.
9.2.1 Navigating the Web display
Click My Targets for a list of all permitted Targets and Target Sets
Click a Target Set to reveal a list of Target servers in that set. From this list you can
click a Target to access it.
Note: The Target list consists of Targets that reside on different KVM switches and
IP Accesses (depending on the infrastructure).
My Properties
Click My Properties to see the Users properties. The User can change his password.
Change the password and retype it, then press OK or Apply. The new password is
saved.
10. Accessing an IP Access unit directly
If the KVM.net Manager System is down e.g. for maintenance, the availability of
each IP Access device remains. You can access an IP Access unit directly by
entering its IP address into your Web browser.
To change any hardware elements and user authorization from the IP Access, you
must first uncheck Enable KVM.net. See page 2 of the Quick guide.