Filter
Top Products
14
English
English
SYSTEM OVERVIEW
These Battery Packs will extend the runtime capabilities of the UPS. These
Battery Packs have internal chargers to properly maintain the internal batter-
ies. The charger will operate with 115VAC or 230VAC depending on the dipswitch
setting. The Battery Pack will charge the batteries with the DC circuit breaker
in the On or Off position as long as the Battery Pack is plugged into the AC wall
outlet and there is an acceptable AC voltage present (90 - 130VAC/180 - 260VAC).
When the commercial power is lost the charger will turn Off and the Battery
Pack will extend the runtime of the UPS. When the commercial power returns
the Battery Pack's internal charger will automatically start recharging the bat-
teries. During normal AC operation, the UPS and Battery Pack will quietly and
confidently protect your system from power anomalies.
TURNING THE BATTERY PACK ON/OFF
Turning the DC circuit breaker to the On position will connect the DC bus
voltage from the Battery Pack to the UPS. Turning the DC circuit breaker to the
Off position will disconnect the DC bus voltage from the Battery Pack to the
UPS. The DC circuit breaker does NOT turn on or turn off the internal charger.
Plug the input power cord into the AC wall outlet to turn on the internal charger.
Unplug the input power cord to turn off the internal charger. The Battery Pack's
internal charger will continue to charge the batteries whenever it is plugged into
an AC wall outlet and there is acceptable AC voltage present (90 - 130VAC/180
- 260VAC).
DIPSWITCH SETTINGS
The dipswitch setting may be changed by the user to set the desired input
voltage for the Battery Pack's internal charger. The dipswitch must be set with
the DC circuit breaker in the Off position and with the input power cord discon-
nected from the AC wall outlet. Set the dipswitch to 115VAC or 230VAC. Plug
the input power cord into the AC wall outlet and turn the DC circuit breaker to
the On position.
INDICATORS
The Charger Active (green) LED illuminates in a steady state when the Charger
is on. The Charger Active LED will extinguish when there is no AC present.
The DC Breaker On (green) LED illuminates in a steady state when the DC
circuit breaker is in the On position. The DC Breaker On LED will extinguish
when the DC circuit breaker is in the Off position.