Minuteman UPS MCP 3000 Power Supply User Manual


 
Thank you for purchasing a Minuteman power protection product. It has been designed
and manufactured to provide many years of trouble free service.
Please read the manual before installing your MCP Series UPS as it pro-
vides the information that should be followed during installation and mainte-
nance of the UPS and batteries allowing you to correctly set up your system
for the maximum safety and performance.
Included is information on customer support and factory service if it is required. If you
experience a problem with the UPS, please refer to the Troubleshooting guide in this manual
to correct the problem or collect enough information so that the Minuteman Technical Support
department can rapidly assist you.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
NOTICE: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at his own expense.
This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus set out in the Radio interference regulations
of the Canadian Department of Communications.
Le présent appareil numérique n’emit pas de bruits radioélectriques dépassant
les limites applicables aus appareils numérique de las Class A prescrites dans
le Règlement sur le brouillage radioélectrique édicte par le ministèredès
Communications du Canada.
WARNING! Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
3