Filter
Top Products
GUIDE TO INSTALLATION AND OPERATION
Kaleido K2 | 17
Figure 4.4.7.3 MWA-BOC cable adapter
4.4.8 Digital Video SD-SDI Input Module (MWI-SDI)
This module provides inputs for four channels of serial digital video. The inputs are on BNC connectors and are
available on the MWR-4B rear connection module (2). The MWI-SDI accepts a 4:2:2 serial digital video signal in
either 525 or 625-line format. This input must conform to the SMPTE 259M-C standard.
Make sure the input 4:2:2 cable has a maximum length of 100 m (325’), and that all serial digital video connections
are point-to-point. For instance, there must be a point-to-point connection between the 4:2:2 IN BNC and the
source equipment. If a T-connector is used to connect other equipment, the maximum specified cable length is no
longer valid.
Figure 4.4.8.1 MWI-SDI rear connector panel
4.4.9 Analog Progressive RGBVH Input Module (MWI-VGA)
This module provides inputs for two channels of VGA-UXGA analog progressive-scan video. The VGA input
module supports non-interlaced resolutions from 640 to 480 pixels up to 1600 x 1200 pixels at 60 Hz. The inputs
are on DE-15P connectors available on the MWR-VGA rear connection module (7).
Figure 4.4.9.1 MWI-VGA rear connector panel
Connect RGBHV signals to the DE-15P connectors (refer to figure 4.4.8.2 below for connector pinout).