Miro Displays FP158 Computer Monitor User Manual


 
12 13
PIN ASSIGNMENT
VGA Connector VGA CONNECTOR
Pin 1 Red 1 5
Pin 2 Green
Pin 3 Blue 6 10
Pin 4 Ground
Pin 5 Ground
Pin 6 Red Ground 11 15
Pin 7 Green Ground
Pin 8 Blue Ground
Pin 9 +5V
Pin 10 Ground
Pin 11 Ground
Pin 12 DDC SDA
Pin 13 Horizontal Sync.
Pin 14 Vertical Sync.
Pin 15 DDC SCL
Note: When resolutions are shown that are lower than the pixel count of the LCD
panel, text may appear choppy or bold. This is normal all current flat panel
technologies when displaying non-native resolutions on a full screen (below than
1024 x 768 resolution). In flat panel technologies, each dot on the screen is
actually one pixel, so to expand resolutions to full screen, an interpolation of the
resolution must be down. When the interpolated resolution is not an exact
multiple of the native resolution, the mathematical interpolation necessary may
cause some lines to appear thicker than others.
SPECIFICATIONS
LCD Type 15” (38.1cm) diagonal viewable screen
TFT (Thin Film Transistor),
Active Matrix Panel, 0.297mm pixel pitch
Color Filter R, G, B vertical stripe
Colors max. 16.7M
Glass surface Anti-glare coating
Viewing
Angles Left / Right 60° / 60°
(CR>10) Up / Down 40° / 60°
Contrast Ratio Typ. 400 : 1
Luminance of White Typ. 250cd/m²
Response Time Max. 40 ms
Compatibility PC IBM XT, AT, 386, 486, Pentium or PS/2
and compatibles (from VGA up to
1024 x 768 @ 75 Hz NI.)
Refresh Rate Max. 1024 x 768 @ 75Hz NI
(60Hz for optimal display)
Frequency Hor. 30 ~ 60 kHz
Vert. 55 ~ 75 Hz
Pixel Rate Typ. 80 MHz
Connectors Input Signal 15-pin D-SUB
Power Input AC 100-240V 50-60Hz
Consumption 25 watts (Maximum)
Display Area Max. 304.1mm (H) x 228.1mm (V)
Operating Temperature 32°F to 104°F (0°C to 40°C)
Humidity 20% RH to 90% RH (no condensation)
Altitude To 10,000 feet
Storage Temperature -14°F to 104°F (-20°C to 40°C)
Conditions Humidity 5%RH to 90%RH (no condensation)
Dimension 356mm (W) x 355mm (H) x 150mm (D)
Weight Net 3.0kg