Filter
Top Products
HOW TO OPTIMIZE THE DOS-MODE
1. Use the full-screen pattern which is included in your driver-disk to start
the adjustment (press Dos1.exe twice, and expand the picture to full
screen while pressing the icon on the top of window, but there is
nothing to press if the picture is already full screen )
If you don't have the monitor driver disk, you can try the following way
to get the full screen pattern at MS-DOS mode: type in C:\> EDIT
[press enter]
You will be in the Dos-Editor screen
2. Press the "AUTO" button (at front panel) during 2 seconds, and the
monitor will do all the adjustment automatically
3. Press "ESC" to quit the pattern file ,or press ALT-F, and then X to exit
from the Dos-Editor screen
If the DOS-Mode characters still have distortion
example:
·
the picture can't go to full screen
·
the background of white pattern has vertical stripe noise
·
the characters are twisted
it means your monitor parameter was in the wrong resolution, please
check if your VGA-CARD supports 720 x 400 @ 70 Hz
Generally, most of the DOS-Mode are set by VGA-CARD in resolution
720 x 400 @ 70Hz, but some are set in 640 x 400 @ 70Hz (our monitor
only supports 720 x 400 @ 70Hz)
MENU DESCRIPTIONS
LANGUAGE
Select this control and then use the and select buttons (2;3) to
choose on of the seven language you need.
R-GAIN (RED)
Select this control to adjust the red level of the display.
G-GAIN (GREEN)
Select this control to adjust the green level of the display.
B-GAIN (BLUE)
Select this control to adjust the blue level of the display.
COOL
The perfomance is bluer and brighter.
WARM
The performance is redder and closer to paper white.
RESET
Reset the currently highlighted control to the factory setting. User must
be using factory preset video mode to use this function.
EXIT
To exit the sub menu.
* Note:
You can get the best quality of the image under full-screen image with a running
computer. The function of AUTO-TUNE may not work properly if background color
is dark or if the input image does not fill the screen. (ex: DOS text mode)
We strongly recommend that you just run the AUTO-LEVEL & AUTO-TUNE function
to get the best image quality when you unpack the monitor or when you install
different VGA card or PC.
8 9