Mitsubishi Electronics HC3 Projector User Manual


 
EN – 30
Specifications
Type
Model
Rated power supply
Rated input
LCD panels
Colors
Projection lens
Light source lamp
Picture size
PC compatibility
Video compatibility
Audio output
Speaker
S-video input
Video input
Audio inputs
Analog RGB input
Control connector
Outside dimensions
Weight
Length of power cord
Temperature, humidity
(performance guaranteed)
LCD projector
HC3
100 - 240 V AC, 50 / 60 Hz
2.6 A
0.7-inch LCD panel: 3 pieces (for R, G, B)
Pixels 960 x 540 = 518,400 pixels
Total 1,555,200 pixels
Active pixel rate: 99.99% or more (each panel)
16,770,000 colors
F 2.0 - 2.3 f = 23 - 27 mm
180 W NSH
40 - 300 inch (aspect ratio 16:9)
Resolution : 640 x 400 (Expand) - 800 x 600 (Compress) - 1024 x 768 (Compress)
Sync on Green available
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60
Component Video (DVD/ HDTV) (480i, 576i, 480p, 576p, 1080i, 720p)
2 W Mono
Round type (16 2 W) × 1
Luminance signal: 1.0 Vp-p 75 (negative sync.)
Chroma signal: 0.286 Vp-p 75 (burst signal)
1.0 Vp-p 75 (negative sync.)
150 mVrms, 10 k or more
RGB: 0.7 Vp-p 75 (negative sync.)
YPBPR(YCBCR): Y:1.0 Vp-p (negative sync.)PBPR(CBCR):0.7 Vp-p
HD/CS : TTL level (positive or negative)
VD : TTL level (positive or negative)
Serial (8-pin connector) RS-232C standards
275 × 70 × 261 mm (width × height × depth) Feet and lens are not included.
Approx. 2.7 kg
114 inch (2.9 m)
+41°F (+5°C) - +95°F (+35°C), 30~90%
Kensington Lock
This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security
System. Refer to the information that came with the Kensington System for instructions on how to use it to
secure the projector. Please contact Kensington Technology Group below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone : +1- (650)572-2700 Fax : +1- (650)572-9675