Filter
Top Products
EN – 10
Basic connections
This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com-
puters having analog RGB output.
Important:
• Make sure that your equipment is turned off before connection.
• Plug in firmly and unplug by holding the plug, not by pulling the main power cable.
• If connected units are set too close to one another, the image may be affected.
• Refer to the owner's guide of each component for details of connections.
Projector + AV equipment
Important:
• Match the color of video and audio plugs on the AV cable with the connections.
• S-video signals take priority over video signals. If you input both S-video signals and normal video signals at
the same time, the normal video input automatically is inhibited.
to audio
output
to video
output
to S-video
output
to audio
output
to video
output
Connect either one of these.
Connect
either one
of these.
DVD player, others
to audio
input 2
to S-video
input 2
to S-video
output
to S-video
input 1
to video
input 2
to audio input 1
to video
input 1
VCR, others
to COMPUTER
1 IN
BG R
HD/CS
VD
DVD player or HDTV decoder
No connection
C
B
(P
B
)YC
R
(P
R
)
BNC - RCA connector
(optional)
Mini D-SUB 15pin-BNC
conversion cable (optional)
Projector + DVD player or HDTV decoder
Some DVD players have output terminal for 3 line fitting (Y, CB, CR). When connecting them to the projector,
connect to COMPUTER 1 IN or COMPUTER 2 IN of the projector. In this case, set “ Y, CB, CR” for COMPUTER
INPUT setting in SIGNAL menu.
Connecting with DVD player
DVD player generally has SDTV system compo-
nent video output (Y, CB, CR) terminal. When con-
necting the projector with DVD player, the COM-
PUTER INPUT in the SIGNAL setting menu be-
comes [Y, CB, CR] automatically.
Connecting with HDTV decoder
Many HDTV decoders have HDTV system compo-
nent video output (Y, PB, PR) terminal. When con-
necting the projector with this type of HDTV de-
coder, the COMPUTER INPUT in the SIGNAL
setting menu becomes [Y, PB, PR] automatically.
• Y, PB, PR is an example of the terminal names for a HDTV decoder.
• The terminal name is different depending on the connected equipment.
• Use mini D-SUB 15 pin-BNC conversion cable for connection.
• Some DVD players may not project the image correctly.
• When connecting with HDTV equipment which has R, G, B output, set RGB for the COMPUTER INPUT in the SIGNAL
setting menu.