Mitsubishi Electronics WL6700U Projector User Manual


 
EN-26
3. FEATURE menu
FEATURE
AUTO (FULL)
AUTO
opt.
MENU POSITION
VIDEO SIGNAL
?
ASPECT
RESET ALL
English
LANGUAGE
A
Ë
OK
SCART INPUT
DISPLAY
INPUT
PASSWORD
FUNCTION
CINEMA MODE
AUTO
1.
SETUP
AUTO
OFF
ITEM SETTING FUNCTION
ASPECT AUTO (FULL) Input video signal is displayed at the max height (800 pixels) or max width
(1366 pixels) of the panel while its aspect ratio is maintained.
AUTO (16:10) Select this setting when using a 16:10 screen.
AUTO (16:9) Select this setting when using a 16:9 screen.
AUTO (4:3) Select this setting when using a 4:3 screen.
16:9 Regardless of the type of input signal, image is displayed at 16:9 aspect
ratio (1366 x 768 pixels). Select this setting when inputting squeeze signal.
REAL Input video signal is displayed at its original pixel size.
FULL Regardless of the type of input signal, image is displayed at the full panel
size (1366 x 800 pixels).
PASSWORD FUNCTION Use to enable or cancel the password lock. See page 34 for details.
MENU POSITION 2 options Use to change the position of the menu.
CINEMA MODE AUTO The fi lm mode will be automatically activated when a fi lm source signal is
input.
Select AUTO for normal use.
When icker occurs on the screen, frame dropping or other incorrect
display occurs, or jaggies on slanting lines are remarkable, select either
FILM or VIDEO, which improves the symptom better.
FILM Fixed to the fi lm mode.
VIDEO The lm mode will not be activated.
VIDEO SIGNAL 8 options When AUTO is selected, the appropriate video format is automatically
selected depending on the input signal. If the image isn’t displayed
correctly, select the desired video format manually.
SETUP AUTO Select to change the SETUP mode automatically.
OFF Select to make black lighter.
3.75% / 7.5% Select to make black thicker.
When 7.5% is chosen, the brightness is decreased by the set-up can-
cel function for the U.S. Choose OFF when the image is dark.
SCART INPUT ON / OFF Choose ON when connecting the projector with a device equipped with
the SCART terminal that can output RGB signal. SCART terminal is used
mainly in Europe. Choose OFF normally. (Available only for the input signal
from the COMPUTER/COMPONENT VIDEO IN 2 terminal.)
LANGUAGE 12 languages Use to select the language used in the menus.
RESET ALL OK
Use to reset the settings of the menu (excluding IMAGE CAPTURE,
PASSWORD FUNCTION and LANGUAGE) to the factory setting values.
CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed.
When SCART INPUT is set to ON, nothing is output to the external monitor.
When SCART INPUT is set to ON, normal computer signals arent projected.
Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped
with the SCART terminal.
Some AV devices equipped with the SCART terminal arent compatible with this projector.
Menu operation (continued)