Filter
Top Products
EN-8
1
2
3
Preparating your projector (continued)
Bottom side
1 Adjustment feet
2 Air inlet grille/Filter cover
3 Lamp cover
Caution:
Do not replace the lamp immediately after using the
projector because the lamp would be extremely hot
and it may cause burns.
30
COMPUTER
VIDEO S-VIDEO
DVI-D(HDCP)
HOME Page Up
END Page Down
AUTO POSITION
KEYSTONE
ASPECT
SPLIT/PiPMAGNIFY
FREEZEAV MUTE
LENS SHIFTZOOM / FOCUS
1
2
VOLUME
18
19
20
22
23
24
25
26
28
29
21
27
CE
MENU
ENTER
LASER
R-CLICK
1
3
4
5
6
7
8
9
11
12
13
14
15
16
10
17
2
Remote control
1 Laser aperture
2 Transmission window
3 Wired remote control jack
4 Indicator
5 POWER button
6 VIDEO button
7 DVI-D(HDCP) button
8 HOME button
9 END button
10 Page Up and Page Down buttons
11 Mouse pointer
12 LENS SHIFT button
13 MENU button
14 ZOOM/FOCUS button
15 + , - (VOLUME) buttons
16 MAGNIFY button
17 COLOR ENHANCER (CE) button
18 COMPUTER 1, 2 buttons
19 S-VIDEO button
20 AUTO POSITION button
21 LASER button
22 S, T, W, X buttons
23 R-CLICK button
24 ENTER button
25 KEYSTONE button
26 ASPECT button
27 SPLIT/PiP button*
28 FREEZE button
29 AV MUTE button
30 Left click button
*: The SPLIT/PiP button functions as the SPLIT button for
this projector. (It doesn’t function as the PiP button.)
• Pressing the LASER button emits a laser beam.
Even when you keep holding down the LASER but-
ton, it is emitted only one minute. To keep emitting
it longer, press the LASER button again.
• You can disable the LASER button to prevent laser
radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the T
button 3 times.
How to enable the LASER button
While holding the LASER button down, press the S
button 3 times.
• Whenever the batteries are replaced, the LASER
button is enabled.
About the laser beam
This remote control is a Class 2 laser product. (Max. output: 1 mW, Wavelength: 620-640 nm)
Beam Divergence: 6 m distance about 10.0 mm x 10.0 mm (±6.0 mm)
Caution:
• Pressing the LASER button on the remote control emits a laser beam. Do not look into the laser beam directly. Do
not point the laser beam at anyone. Looking at the laser beam directly may damage eyesight.
• Use of controls or adjustments or procedures other than those specifi ed herein may result in hazardous radiation exposure.
• This remote controller cannot be repaired.