Mitsubishi Electronics X70 Projector User Manual


 
EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select the INSTALLA-
TION menu.
3. Press the ENTER button (or } button).
4. Press the { or } button to select AUTO POWER
OFF.
5. Press the $ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
If the menu operation is not working, press the
RESET button on the terminal board using the suit-
able implement
If the COMPUTER or VIDEO button is pressed, the
MENU selection bar or MENU will disappear.
The settings with 2 mark, you should press the
ENTER button after selecting.
Menu operation
Opt
IMAGE
XGA60
INSTALLATION
Opt
XGA60
IMAGE REVERSE
INSTALLATION
OFF
KEYSTONE 0°
AUTO POWER ON OFF
AUTO POWER OFF OFF
Opt
XGA60
KEYSTONE 0°
AUTO POWER ON OFF
AUTO POWER OFF OFF
KEYSTONE 0°
AUTO POWER ON OFF
AUTO POWER OFF 30 min
IMAGE CONTRAST ± 30
BRIGHTNESS ± 30
1
COLOR MATRIX
SHARPNESS ± 10
TINT ± 10
COLOR ± 10
RED ± 10
YELLOW ± 10
BLUE ± 10
GREEN ± 10
CYAN ± 10
MAGENTA
(Displays only when the source is selected to VIDEO)
(For LVP-X70U)
(1 - 2 : For LVP-X50U)
(For LVP-X70U only)
(Displays only when the source is selected to VIDEO)
(AUTO : When the source is selected to COMPUTER)
± 10
CONTRAST R ± 30
CONTRAST B ± 30
BRIGHTNESS R ± 30
BRIGHTNESS B ± 30
EXPAND MODE 1 - 4
1=Upper left, 2=Lower right
FRAME POSITION 1 - 5
INSTALLATION IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
KEYSTONE ± 15˚
AUTO POWER ON ON, OFF
AUTO POWER OFF
1 - 3
ON, OFF
FEATURES MENU POSITION
OFF, 5, 10, 15, 30, 60 min
VIDEO SIGNAL
AUDIO MODE
ANAMORPHIC
AUTO, NTSC, PAL, SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60
LANGUAGE
SIGNAL MEMORY CALL AUTO, USER1, USER2
HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 39
TRACKING
USER
0 - 9999
CLAMP POSITION 0 - +63
CLAMP WIDTH 0 - +63
HORIZ. PIXELS 0 - 9999
VERT LINES 0 - 9999
PLL
AUTO, 0 - 7
SHUTTER (L)
0 - 383
SHUTTER (U)
0 - 383
VERT. SYNC
AUTO, ON, OFF
2
3
USER
USER
OFF
STANDARD
HIGH
LOW
COLOR TEMP.
USER
MEMORIZE
*
*
*
HOLD AUTO
USER1
,
USER2
DELETE
USER1
,
USER2
DEFAULT
ON
BEGIN -1 - -99
END 1 - 99
OFF
COMPUTER INPUT RGB, YC
B
C
R
/ YP
B
P
R
*
*
*
*
* : Setting range is different
according to the type of
the signal.
, English, Español, Deutsch, Français, Italiano,