Mitsubishi Electronics X70 Projector User Manual


 
EN – 16
IMAGE REVERSE
INSTALLATION
OFF
KEYSTONE 0°
AUTO POWER ON OFF
AUTO POWER
OFF
OFF
Opt
XGA60
MENU POSITION
FEATURE
AUDIO MODE 2
ANAMORPHIC OFF
LANGUAGE English
VIDEO SIGNAL AUTO
A
Ë
?
Opt
XGA60
EXPAND MODE 1.
FRAME POSI.
A
A
A
A
1.
1.
1 IMAGE
CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher
as the number increases.
BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as
the number increases.
COLOR MATRIX. ......
Adjusts color balance in each color of the image. See page
18.
COLOR TEMP... . Adjusts color temperature. See page 18.
SHARPNESS ...... Adjusts the picture sharpness. The sharpness becomes
sharper as the number increases.
TINT .................... Adjusts the color balance of the image. The color balance
of the image shifts green as the number increases and
shifts to purple as the number decreases (displays only when the source is selected to
VIDEO).
When the TV50 (PAL, SECAM) signal is inputted, you cannot adjust the TINT.
COLOR ................Adjusts the color intensity of the image (displays only when the source is selected to VIDEO).
2 INSTALLATION
IMAGE REVERSE
Use to reverse or invert the projected image. MIRROR is
used for rear projection. MIRROR INVERT is effective
when the projector is ceiling-mounted.
KEYSTONE ........ Adjusts keystone correction of the image. If the image has
keystone distortion, select the approximate setting. For
normal use, select 0˚. (Displays LVP-X70U only).
AUTO POWER ON .....
To select whether to boot up automatically when the power is
turned on external to the projector. In this case, the main
power switch of the projector has to be ON. Set this when the projector is hanging on the ceiling.
The projector is in stand-by mode when the lamp is not on. In this case, use the remote
control to turn on the lamp.
AUTO POWER OFF ..
Use to select the length of time before projector switches to stand-by when there is no input
signal selected source. Select 0 min. to cancel this function.
3 FEATURES
MENU POSITION .
Use to select the position where the menu is displayed,
(upper left) or (lower right).
EXPAND MODE Selects the mode of enlarging screen. See page 21.
FRAME POSI. .... Sets the position of sub screen. See page 21.(Displays
LVP-X70U only).
AUDIO MODE .......
Select 1 (COMPUTER mode) to output the sound which is
inputted to audio input terminal only when the source is
selected to COMPUTER. Select 2 (VIDEO mode) to output
the sound which is inputted to audio input terminal only
when the source is selected to VIDEO. Select 3
(PARMANENT mode) to output the sound which is
inputted to audio input terminal all time.
SPLASH SCREEN .
Use to display the splash screen on the screen when the power is turned ON.
VIDEO SIGNAL . When AUTO is set, the appropriate video format is automatically selected according to the
input signal. If the image does not appear correctly, select the desired video format
manually. Adjust the projector to the appropriate format when the projector either is not
projecting normally in auto mode or is projecting PAL-M/PAL-N signals.
ANAMORPHIC... Set to ON when displaying DVD discs which are recorded as squeezed images (in right and
left direction).
LANGUAGE ....... Use to select the language for the projector display such as menu. ( / English / Español
/ Deutsch / Français / Italiano / )
Opt
CONTRAST
IMAGE
0
BRIGHTNESS 0
COLOR TEMP. STANDARD
TINT 0
COLOR 0
SHARPNESS 0
XGA60
COLOR MATRIX
USER
Menu operation (continued)