Mitsubishi Electronics XD400U Projector Accessories User Manual


 
EN - 19
ENGLISH
Image adjustment
CONTRAST R
COLOR TEMP.-USER
0
CONTRAST B 0
BRIGHTNESS R 0
BRIGHTNESS B 0
CONTRAST
IMAGE
0
BRIGHTNESS 0
STANDARD
0
COLOR
AUTO
0
XGA60
CineRichColor AUTO
COMPUTER
OFF
TINT
0SHARPNESS
COLOR TEMP.
GAMMA MODE
COLOR MATRIX
sRGB
opt.
4. Press the or button to select the desired color.
If you want to adjust the all color balance of the
image, select RGB-TINT.
5. Press the or button to adjust the color balance
of the selected color.
6. Repeat steps 4 and 5 for optimum adjustment re-
sults.
7. Exit the menu by pressing the MENU button several
times.
When the input source is VIDEO or COMPUTER, the
setting items in the color matrix adjustment are au-
tomatically set to the predetermined values. You can
change these settings manually.
To cancel the color matrix adjustment, select OFF in
step 2.
When the color matrix adjustment is carried out, the
colors in the menu will also vary. This isn't a product
malfunction.
Color temperature
1. Select COLOR TEMP. in the IMAGE menu.
2. Press the or button to select USER
.
3. Press the ENTER button.
4. Press the or button to select the desired item.
5. Press the or button to adjust the selected item.
6. Repeat steps 4 and 5 for optimum adjustment re-
sults.
7. Exit the menu by pressing the MENU button several
times.
COLOR MATRIX
0
0
0
0
0
0
0
RED
RGB-TINT
GREEN
BLUE
YELLOW
CYAN
MAGENTA
About color temperature
There are different kinds of white color. Color tem-
perature is a way to show the differences in white.
White of which temperature is low appears reddish.
When the color temperature rises, white appears blu-
ish. This projector adjusts this color temperature by
changing the values of contrast blue and red.
To rise the color temperature:
Increase the CONTRAST B (blue) and decrease the
CONTRAST R (red).
To reduce the color temperature:
Decrease the CONTRAST B (blue) and increase the
CONTRAST R (red).
Image adjustment
You can adjust the image using the IMAGE menu.
To control the white-to-black level of the image :
Adjust CONTRAST in the IMAGE menu. Press the
button to increase the contrast and the button to
reduce it.
To control the light level of the image :
Adjust BRIGHTNESS in the IMAGE menu. Press the
button to lighten the image and the button to darken
it.
To determine the intensity of the color :
Adjust COLOR in the IMAGE menu. Press the
but-
ton to increase the amount of color in the image and
the
button to decrease it.
To adjust the red-green color balance of the image :
Adjust TINT in the IMAGE menu. Press the button to
increase the amount of green in the image and the
button to increase the amount of red in the image.
To adjust the detail and clarity of the image :
Adjust SHARPNESS in the IMAGE menu. Press the
button to sharpen the image and the button to soften
the image.
Color matrix
This projector adjusts the color balance in each color of
RGB (red, green, and blue), and their neutral colors (yel-
low, cyan, and magenta) by the color correction adjust-
ment. Use the color correct adjustment when you want
to emphasize color or when only a certain color balance
is not correctly adjusted.
1. Select COLOR MATRIX in the IMAGE menu.
2. Press the or button to select USER
.
3. Press the ENTER button.