Filter
Top Products
InVision USB-Peri
p
heral to Ethernet Ada
p
ter User Guide
Getting Started
Before You Begin
Before you can successfully connect your Symbol MC50 or MC3000 to your
network with your PS6U1UPE, you must have successfully configured your
device for ActiveSync operations. For assistance with ActiveSync operations,
please refer to your Symbol Integrator Guide.
Only after you have successfully created an ActiveSync partnership between
your MC50 or your MC3000 and your host computer, and completed an
ActiveSync operation, should you attempt to connect your device to your
network. This is important even if you plan to use other 3
rd
Party
synchronization software, because using ActiveSync allows you to validate
your software/hardware installation. Then, if you have problems later making
your 3
rd
Party software work, you can focus on the 3
rd
Party software
configuration because you know everything else works fine.
Connecting to the PS6U1UPE
Setting up the MC50
Installing the MC50 Software Drivers
The MC50 requires the installation of software drivers to enable it to communicate through
your network to complete ActiveSync, or synchronization operations. By design, the MC50
functions as a USB client device. With the installation of these drivers, the MC50 will now be
able to also function as a USB host device.
If you have not already done so, go to
www.invisioncradles.com and download the latest
PS6U1UPE drivers. The drivers are provided in a self-extracting ZIP file. Simply download
the file to your computer and follow these simple steps:
Step 1 – Unpack the software
Double-click the downloaded file to extract the drivers. The ZIP file will automatically
unpack the MC50 driver software components to a default directory called C:\MC50Drivers.
You may change this directory if you wish. However, if you change the directory be sure
that you remember where you put it, because this is the location where you will move the
files “from.”
Step 2 – Verify MC50 Configuration
Before you start to install the MC50 driver software,
you must ensure you have successfully completed an
ActiveSync between the MC50 and your computer via
the MC50’s USB cable.
If you have not already configured ActiveSync, please
do so now and ensure that you successfully
synchronize between the MC50 and your PC before
you continue. If you need help, refer to your MC50
Integrator’s Guide, or contact Symbol Technical
Support for assistance.
2 Mobility Electronics, Inc