Filter
Top Products
InVision USB-Peri
p
heral to Ethernet Ada
p
ter User Guide
Step 3 – CAB File Installation
To install the CAB file directly onto the MC50, follow these simple steps:
Connect the MC50 USB cable to a USB port on your computer.
Open your Windows Explorer and browse to the
\MC50 Drivers folder to locate the file
USBOTG.MC50.CAB.
Next, open ActiveSync and click on the Explore button.
Then “drag & drop” the
USBOTG.MC50.CAB file onto the My
Pocket PC icon in the ActiveSync window.
You will be prompted that the file may need
conversion. Simply click OK to continue.
Step 4 – Install the CAB File
Use the MC50’s stylus to open
Start>>Programs>>File Explorer. You
should find the USBOTG.MC50.CAB file
below the bottom of the folder list. Use the
stylus to double-click on the
USBOTG.MC50.CAB file and execute it
After the CAB file installation completes, you will need to use the stylus to
perform a soft reset the MC50. The reset button can be found on the bottom of
the MC50. Consult your MC50 documentation if you need help finding the reset
button.
Step 5 – Install the Additional Drivers
After the MC50 has reset, return to your
computer’s ActiveSync Window and double-
click on the My
Pocket PC icon to
display the main
folder structure on
the MC50. When you
see the adjacent file structure, double-click
on the \Windows folder to gain access to
the bvd_udc_ser.dll file which must be
replaced by a custom version of the USB
function driver. This new driver is included in
the MC50 Drivers folder. To correctly replace
the file, browse to the MC50 \Windows folder with the ActiveSync File Explorer
and rename the bvd_udc_ser.dll file to bvd_udc_ser_old.dll.
3 Mobility Electronics, Inc