Filter
Top Products
13
TROUBLESHOOTING
Symptom
Possible Cause
Remedy
The PowerCenter is
not receiving power.
The PowerCenter
is not turned On.
• Turn the PowerCenter switch on.
• Make sure the PowerCenter’s AC power plug is plugged into
a properly grounded 120 volts (nominal) wall outlet.
• In some households, a wall switch may need to be turned on
to make the wall outlet active. Try turning on the light switches
located near the wall outlet.
Too many devices are connected, causing
an overload, tripping the Thermal
Circuit Breaker.
• Press the PowerCenter Thermal Circuit Breaker button in to
reset. Please allow 10 minutes before attempting to reset. If
you reset too soon, the breaker will prematurely sense power
overload and not allow the PowerCenter to operate.
• If the Circuit Breaker continues to trip, try moving one or more
components to another PowerCenter. You may be drawing too
much current through one PowerCenter.