Filter
Top Products
UPort 1100 Series User’s Manual Installation and Configuration
Hardware Installation
After installing the driver, plug the converter into any upstream USB port, such as a USB port on
your computer. Windows will automatically detect the converter and begin installing the driver.
When the Windows finishes installing the driver for the converter, it will then detect a new COM
port, and will then install another driver for the new COM port.
ATTENTION
For best results, we recommend that you install the driver before plugging the converter into the
USB port. Please refer to the previous section on Initial Driver Installation for instructions.
Windows 98/ME and Windows 2000
The following instructions are for Windows 98 and Windows 2000 systems:
1. After plugging the converter into a USB port, the Found New Hardware window should
open automatically. The USB icon indicates that the USB port is being installed. No action is
required.
2. Windows 98 users may skip to the next step. On Windows 2000 systems, a window will pop
up cautioning you that this software has not passed Windows logo testing. This is a standard
warning, and Moxa has thoroughly tested the driver for safe Windows operation. Please click
Yes to proceed.
2-5