Filter
Top Products
UPort 1100 Series User’s Manual Installation and Configuration
Removing the Converter
The converter is a plug and play device. No special procedures are required to remove the
converter; you may simply pull the converter out of the USB port. You should verify that no data
is being transmitted before removing the converter.
Removing the converter does not remove the drivers. The drivers remain in place so that the
converter can be automatically detected and installed if it is pluged back into the USB port.
The converter can also be uninstalled through the Device Manager, the same as other Windows
devices. Right-click the converter, which will be found under Multi-port serial adaptors, then
select Uninstall from the context menu.
2-16