Filter
Top Products
CP-102U/UL User’s Manual Software Installation
3-29
Configuring the Ports
Follow the procedures given below to re-configure the board’s COM ports.
Since CP-102U/UL is a Universal PCI board, when a new board is added or an existing board is
removed, the board’s configuration will be added or removed automatically by the operating
system when you restart the PC.
1. Open the Control Panel and the double click on the System icon.
2. Select the Device Manager tab, click on the desired CP-102U/UL board under Moxa
Smartio/Industio multiport board to highlight it, and then click on Properties.