Filter
Top Products
CP-102U/UL User’s Manual Software Installation
3-37
6. Select MOXA Smartio/Industio Family multiport board in the Select OEM Option
window, and then click on OK to start installing the driver.
7. The Moxa Smartio/Industio Configuration Panel window appears. Click on Add to open
the Property configuration window to change port settings and set advanced FIFO
configuration options.
8. Continue from Step 3 in the next section, “Configuring the Ports.”
Configuring the Ports
Follow the instructions in this subsection if the CP-102U/UL Windows NT driver is already
installed, and you wish to re-configure a board’s ports or configure the ports of a newly installed
board. In addition to the procedures listed below, you may also click on Start # Programs #
MOXA Utility # MOXA Smartio/Industio Configuration Panel # Property, and then refer to
the instructions in the previous section, “Installing the Driver for the First Time.”
1. Open the Control Panel, click on the Network icon, and then select the Adapters tab. Click
on MOXA Smartio/Industio Family Adapter to highlight it, and then click on Properties.