Filter
Top Products
EDS-726 Series User’s Manual Featured Functions
3-12
System File Update—By CF Card
Setting Description Factory Default
Enable CF Save/Load Enable saving and loading configuration and/or
firmware from the CF card.
Unchecked
Configuration Check to enable saving and loading the
configuration from the CF card (this option is
selected by default if Enable CF Save/Load is
checked).
N/A
Firmware Check to enable saving and loading the firmware
from the CF card.
N/A
Factory Default
The Factory Default function is included to give users a quick way of restoring EDS-726’s
configuration settings to their factory default values. This function is available in the Console
utility (serial or Telnet) and Web Browser interface.
NOTE
After activating the Factory Default function, you will need to use the default network settings to
re-establish a web-browser or Telnet connection with your EDS-726.
Using Port Trunking
Link Aggregation allows one or more links to be aggregated together to form a Link Aggregation
Group. A MAC client can treat Link Aggregation Groups as if they were a single link.
EDS-726’s Port Trunking feature allows devices to communicate by aggregating up to four links
in parallel, with a maximum of eight ports for each link. If one of the eight ports fails, the other
seven ports will provide back up and share the traffic automatically.
Port trunking can be used to combine up to eight ports between two EDS-726 switches. If all ports
on both switch units are configured as 100BASE-TX and they are operating in full duplex, the
potential bandwidth of the connection will be 1600 Mbps.