Filter
Top Products
NPort 5400 Series User’s Manual Web Console Configuration
5-28
ATTENTION
Consult your Network Administrator or ISP for the proper mail server settings. Auto warning
function may not work properly without proper settings. NPort SMTP AUTH support LOGIN,
PLAIN, CRAM-MD5 (RFC 2554).
SNMP Trap Server
SNMP trap server IP or domain name
Setting Factory Default Necessity
IP or Domain Name None Optional
Event Type
Cold start
This refers to starting the system from power off (contrast this with warm start). When performing
a cold start, NPort will automatically issue an Auto warning message by e-mail, or send an SNMP
trap after rebooting.
Warm start
This refers to restarting the computer without turning the power off. It’s the opposite of cold start.
When performing a warm start, NPort will automatically send an e-mail, or send an SNMP trap
after rebooting.
Authentication failure
The user inputs a wrong password from the Console or Administrator. When authentication failure
occurs, NPort will immediately send an e-mail or send an SNMP trap.
IP address changed
The user has changed NPort’s IP address. When the IP address changes, NPort will send an e-mail
with the new IP address before NPort reboots. If the NPort fails to send mail to the mail server
after 15 seconds, NPort will be rebooting directly and abort the mail auto warning.