Filter
Top Products
Preface
1-97
97
Selecting the LED Flashing Mode under Standard Status
Click on [ Standard ],
Select a desired LED flashing mode from the option: Dual Color, Wave, Breathing,
Gaming, and Normal.
Normal Mode:
1. When this mode is selected, the keyboard LEDs will always stay lit with the
selected color.
2. Select an LED section (A, B, or C) by clicking on the corresponding area on the
diagram.
3. Select a desired LED color for each LED section by clicking on the color wheel.
4. The selected color for each LED section will be shown in the LED Color
Indicators below the keyboard diagram.
5. To turn off the LEDs of a particular LED section, simply click on the LED switch
above each LED section.
6. To group all three LED sections into one main section, click [ Lock Keyboard ]
on the left hand side. Then only one LED color can be selected for the keyboard
LEDs.