Filter
Top Products
4 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1
1 GENERAL
This manual provides you with the information you need to properly install your new FFD 2.5”
or 3.5” IDE Plus Flash Disk. M-Systems recommends that qualified and trained personnel install
the drive.
The following chapters contain handling information, mounting considerations, address and
configuration setups, cabling and connector information and information about obtaining
technical assistance and service.
Remember - Always back up your data before adding disk drives to your system!
2 KIT CONTENTS
Ensure that your kit contains the following items:
For 2.5” version:
• FFD 2.5” IDE Plus Flash Disk
• Four mounting screws and two jumpers, M-Systems part no. 48-PK-008-00.
For 3.5” version:
• FFD 3.5” IDE Plus Flash Disk
• Four mounting screws and two jumpers, M-Systems part no. 48-PK-016-00.
If any items are missing, please contact your dealer.
3 VISUAL INSPECTION
Before unpacking or handling a drive, take all proper electrostatic discharge (ESD) precautions,
including personnel and equipment grounding.
Before you begin installing the IDE Plus, inspect the package and device as follows:
• If the shipping container appears to be damaged or water stained, notify your dealer.
• Remove the disk from its shipping enclosure and inspect it for any damage that may have
occurred during shipment. If any damage is observed, notify your dealer.
• Record the disk serial number and shipment date.
• Retain the original shipping enclosure and all packing material for re-shipment.