Support User Manuals

Multitech 410 Fax Machine User Manual

Open as PDF

of 153

Chapter2–InstallingandCablingtheMultiVOIP

16 MultiVOIP®Voice/FaxoverIPGateways



3. Pullthemaincircuitcardoutabout5inches(thepowerconn ectiontotheboardpreventsitfrombeing

removedentirelyfromthechassis).

4. IdentifythechannelsonwhichtheDIDinterfaceisused.



5. PositionthejumperforeachDIDchannelsothatitdoesnotconnectthetwojumperposts.ForDID

operationofaVOIPchannel,theMultiVOIPworksproperlyifyousimplyremovethejumperaltogether,but

thatisinadvisablebecausethejumpermightbeneededlaterifadifferenttelephonyinterface

isusedfor

thatVOIPchannel.

6. SlidethemaincircuitcardbackintotheMultiVOIPchassisandreplacethethreescrews.

previous next