Filter
Top Products
15-IWay Hopper
Installation
MIC IN
LINE OUT
LINE
PHONE
Figure 2-3 Modular Analog and BRI Connections
4a. Make the ISDN connection. Connect the MT128ISA-SD/SV adapter and NT1
with RJ-45 cable connector, and insert the ISDN BRI line into the correct NT1
socket.
OR
4b Insert the ISDN BRI line with the RJ-45 connector cable directly into the RJ-
45 jack on the MT128ISA-UD/UV adapter.
Your ISDN PC environment is ready for installation. The MT128ISA-SD/SV
adapter attaches to the ISDN T interface from the NT1. The MT128ISA-UD/UV
adapter attaches to the ISDN U interface directly with ISDN switch. Proceed to
Section 2.4 for further specifics on installation.
RJ11 Analog Connection
(telephone, G3 Fax,
Answering Machine, Modem
or PBX Trunk)
RJ45 BRI Connection