Filter
Top Products
FaxFinder Cabling Guide Cabling Instructions
MultiTech Systems, Inc. 11
Part B: Connect to Telephony Service
The FF100’s fax modem can either be connected to a PBX
(for use in PBX Routing Mode) or to a POTS line
(for use in POTS Mode).
Connection for
PBX Routing Mode
Connection for
POTS Mode
Plug one end of the phone
cable into the FaxFinder’s
LINE jack and the other
into an available Station
Port on the PBX.
Plug one end of the phone
cable into the FaxFinder’s
LINE jack and the other end
into your standard telephone
receptacle.
An RJ11-to-RJ11 cable is included with your FaxFinder.
PBX Routing Mode
POTS Mode