Filter
Top Products
Cabling Instructions FaxFinder Cabling Guide
8 MultiTech Systems, Inc.
Cabling Process
Part A: Connect the FaxFinder to Power Outlet and
Ethernet
Summary: Place the FaxFinder in a convenient location, and
then connect it to your AC power outlet and Ethernet.
1. Connect FaxFinder to AC Outlet.
Plug the DC power transformer into a power outlet or power
strip. Secure the other end to the PWR jack on your FaxFinder.
The DC power transformer is included with your FaxFinder.
Caution: Use only the DC power transformer supplied with
the FaxFinder. Use of any other transformer voids the
warranty and can damage the FaxFinder.
Note: The FF100’s power supply connector will be either:
(1) a plug-to-jack connection with a screw-on retaining
ring, or (2) a simple plug-to-jack connection.