Filter
Top Products
GPS1200 GFU19 MultiTech CDMA Modem Quick Guide July, 2005
Page 12/18
GFU19 Multi-Tech CDMA Modem
Connecting to a Network Using the Multi-Tech CDMA Modem
Connect with
the Multi-Tech
CDMA modem
Follow the steps below to connect the GPS1200 sensor to a network using the Multi-
Tech CDMA modem.
Step Action Display
1
Continuing from the previous section:
• In the Main Menu select 5 Config…
• In the Configuration Menu select
4 Interfaces…
• In the Interfaces Menu highlight Real-
Time and press the F3 (EDIT) button.
This takes you to the Real-Time Mode
screen.
2
In the Real-Time Mode screen:
• In the R-Time Mode field, select
Rover.
• In the Port field, select NET1-3 to
define the port through which you
wish to connect.
• Press the F1 (CONT) button to save
your settings.
This returns you to the Interfaces screen.
Continued on next page