Filter
Top Products
GPS1200 GFU19 MultiTech CDMA Modem Quick Guide July, 2005
Page 8/18
GFU19 Multi-Tech CDMA Modem
Setting Up the Multi-Tech CDMA Modem
Set up the
Multi-Tech
CDMA Modem
Follow the steps below to setup the GPS1200 sensor to use the GFU19 Multi-Tech
CDMA modem.
Step Action Display
1
Begin with the sensor turned off.
• Attach your CDMA module to Port 1
or 3 on the sensor.
• Press the ON (PROG) button to turn
on the sensor.
• Select 5 Config… from the Main
Menu.
This takes you to the GPS1200 Configuration
screen.
2
From the GPS1200 Configuration screen:
• Select 4 Interfaces…
This takes you to the CONFIGURE Interfaces
screen.
3
From the CONFIGURE Interfaces screen:
• Highlight Internet and press the F3
(EDIT) button.
This takes you to the CONFIGURE Internet
Interface screen.
Continued on next page