Filter
Top Products
122 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Terminal Adapter AT Commands & S-Registers
&Wn Store Active Profile
Values: n = 0 or 1
Default: &W1 (Use factory default profile)
Stores your active profile, or configuration, in memory, so you dont lose
your custom settings when you turn off the TA or reset it.
&W0 Stores all current AT command and S-
register values in nonvolatile random access
memory (NVRAM) and configures the TA
so it reads your custom settings in NVRAM
when the modem is turned on or when it is
reset with the Z command. (The &F reset
command continues to read the factory
default settings in ROM.)
&W1 Erases your custom settings in NVRAM the
next time the TA is turned off or reset,
causing the TA to read the factory default
settings in ROM whenever it is turned on or
reset.
&Zn=x Store Telephone Number
Values: n = 09; x = dial string
Default: n/a
Allows you to store a telephone number in a memory register for faster
dialing. To store a number, type &Z, the register number (09) where you
want to store the number, the = character, and the dialing string you want
stored. Then press ENTER. The dialing string can have up to 80 characters.
To read a stored number, type AT&Zn? (e.g., AT&Z4?) where n is the
number of the register you want to read. To display a list of all numbers
stored in memory, type ATL and press RETURN:
0 14082345678
1 16125551212
2 14089876543
3
4 6313551
5