Filter
Top Products
MR9600 User Guide
18 CommPlete Communications Server
Web Interface Limitations
The Web interface does not provide a full management interface. Full management is provided by our
MultiCommManager software, or through the use of a third party SNMP manager. However, once the
system is set up, most management can be done using the Web browser interface.
FTP Interface
FTP (File Transfer Protocol) is a standard Internet protocol that allows the transfer of files between two
systems connected to a TCP/IP network, such as the Internet. The MR9600 acts as an FTP server so that
FTP clients can send and receive files to and from it.
You need FTP to transfer configuration files (*.cfg) to and from your system. If you plan to use
MultiCommManager security, you need FTP to transfer security files (*.db) to and from your system. If
you wish to analyze event information, you also need FTP to transfer event files (*.hr) from the MR9600 to
a management computer where you can run the Statistical Analyzer on them.
Note: When logging in, you must use the Supervisor user name and password.