Filter
Top Products
5 Commands
CommPlete Communications Server 27
Commands Listed by Security Level
This section lists the MR9600’s commands by security level. The security levels are Guest, Operator, and
Supervisor.
For an expanded description of each command, see “Command Reference” on page 30.
Guest
Command Name Parameters Description
A: None Changes the drive the user is to work with
B: None Changes the drive the user is to work with
bye None Logs the user off the system
cat Pathname Display the contents of an ASCII text file
cd, chdir Pathname Change to the specified directory
cl, clock None Displays current date and time
dir Pathname Display the contents of a directory
exit None Logs the user off the system
getgateway None Display the configured gateway address
getip None Display the configured IP address
getpowerstatus, getpsNone Displays the main power supply/supplies status and
which segments are powered up
getsendtrap None Displays whether traps are being sent or not.
getsubnet None Display the configured subnet mask
gettemp None Displays the internal ambient temperature of the rack
in degrees Fahrenheit and Celsius.
gettrap None Display the configured trap address
history None Display command history buffer
logout, lo None Logs you off of the system so next user has to login
to get access.
ls Pathname Display the contents of a directory
more Pathname Displays the contents of a file, one page at a time
passwd, password None Will prompt you for old, new, and new password
quit None Logs the user off the system
security None Allows the modification of a subordinate security
levels username and password
t1status Device Displays the status of a T1 device
type Pathname Displays the contents of an ASCII text file
userid None Prompts you for old, and new user id
version, ver None Displays the version number and release date of the
CC9600 Controller’s Operating System
whoami None Tells you what user is currently logged in