Filter
Top Products
5 Commands
CommPlete Communications Server 23
Commands Listed by Function
This section lists the MR9600’s commands alphabetically by the following functions: Display,
Environment, File, Modem Control, and Security.
For an expanded description of each command, see “Command Reference” on page 30.
Display
Command Name Parameter Description
getcalls Device Displays call traffic for the device
getfaults Device Displays faults for the device
getmodems Device Displays the current status for the device
getpowerstatus, getpsNone Displays the main power supply/supplies status and
which segments are powered up
getrack Device Displays the chassis type
getslots None Displays hardware type and location in rack
gettemp None Displays the internal ambient temperature of the rack
in degrees Fahrenheit and Celsius.
Environment
Command Name Parameters Description
bpstatus None Displays the rack’s back plane polling activity
between the controller and each powered device
cl, clock None Displays current date and time
date None Prompts you for current date
getgateway None Display the configured gateway address
getip None Display the configured IP address
Getprichannels Device Retrieve the current status of each B-channel and
modem channel under the control of the PRI card.
getreadcommunity None Displays the Read community settings
getsendtrap None Displays whether traps are being sent or not.
getsubnet None Display the configured subnet mask
gettrap None Display the configured trap address
getwritecommunity None Displays the Write community settings
more Pathname Displays the contents of a file, one page at a time
priocbchannel Device Set the specified channel in service
priosbchannel Device Set the specified channel out of service
pristatus Specifier Retrieve the current status of the specified PRI card
prisetup Specifier Set configuration parameters for a PRI card.