Filter
Top Products
MultiMobile Owner’s Manual
34
Notes for NDIS Driver
The following are examples of partial CONFIG.SYS
and AUTOEXEC.BAT files for loading System Soft‘s
Card Services and NDIS2 driver:
Example of partial CONFIG.SYS file:
device=c:\cardsoft \ss365sl.exe
device=c:\cardsoft \cs.exe
device=c:\cardsoft \csalloc.exe c:\cardsoft\csalloc.ini
device=c:\lanman.dos\drivers\ethernet\lm28\carden.exe
/iop=nnn /irq=n /com=n /mir=n
device=c:\cardsoft \cardid.exe
device=c:\lanman.dos\deivers\protman.dos/i:c:\lanman.dos
device=c:\lanman.dos\drivers\ethernet\lm28\lm28nds.dos
Example of partial AUTOEXEC.BAT file:
set path= c:\lanman.dos\netprog;%path%
net start workstation
load netbeui
The Ethernet function configuration information for
the DOS NDIS driver is contained in the
PROTOCOL.INI file. To make allowances for
passing the requested modem COM port (COM1, 2,
3, or 4) to the driver, there has been another field
added. The section of the PROTOCOL.INI file that
contains configuration information for this card must
begin with [LM28NDS2_NIF].
The valid PROTOCOL.INI file entries are listed
below: