Filter
Top Products
MultiMobile Owner’s Manual
48
address and/or interrupt. If you wish to use COM3
or COM4, note that COM3 shares an IRQ with
COM1, as does COM4 with COM2, so you should
change their IRQs to unused ones, if possible.
Windows 95
In Windows 95, right-click on My Computer, select
Properties from the menu, click on the Device
Manager
tab, double-click on
Ports
, then double-
click on the
Communications Port
your modem is
connected to. In the port’s
Properties
sheet, click on
the
Resources
tab to see the port’s Input/Output
range and Interrupt Request. If another device is
using the same address range or IRQ, it will appear
in the Conflicting Device List. Uncheck “Use
Automatic Settings” to change the port’s settings so
they do not conflict with the other device, or select
the port the conflicting device is on and change it
instead. If you need to open your computer to
change switches or jumpers on the conflicting
device, refer to the device’s documentation.