Filter
Top Products
7 Leased Line Operation
73
9. Press the á
ß
or â button several times to select the first digit in the number.
10. Press the à button to go to the next digit in the number.
11. Repeat steps 9 and 10 until you have entered a value between 10 and 255, and
then press the Enter button to store it. The TIME STORED screen appears.
12. Press the Enter button to go to the TIME TO RESTORE (S15) screen.
13. To change the default dial backup time, press â, à, à. The ENTER TIME IN
MINUTES screen appears.
14. Repeat steps 9 and 10 until you have entered a value between 0 and 255, and
then press the Enter button to store it. The TIME STORED screen appears.
15. Press the Enter button again to go to the DIAL BACKUP TIME (S17) screen.
16 . Dial backup and leased line restoral setup is complete.
Note: Registers S15 and S17 can also be changed using the Sr=n AT command. See
Chapter 4.