Filter
Top Products
MultiVOIP User Guide Technical Configuration (Analog)
195
FXO Interface: Parameter Definitions
Field Name Values Description
Interface, FXO Y/N Enables FXO functionality
Dialing Options
Regeneration Pulse, DTMF Determines whether digits
generated and sent out will be
pulse tones or DTMF.
Inter Digit
Timer
integer values,
in seconds
This is the length of time that
the MultiVOIP will wait
between digits. When the time
expires, the MultiVOIP will
look in the phonebook for the
number entered.
Default = 2.
Flash Hook
Timer
integer values,
in milliseconds
Length of flash hook that will
be generated and sent out when
the remote end initiates a flash
hook and it is regenerated
locally. Default = 600 ms.
Message
Waiting Light
Y/N
Applicable only when
MultiVOIP is used with Avaya
Magix PBX units equipped with
Merlin Messaging Centralized
mail. When enabled, the
Message Waiting Light feature
allows the PBX to send mode-
codes and message-waiting
indications to another Avaya
Magix PBX, which in turn will
turn on the message waiting
light on a phone station. It also
allows Direct Inward Dialing,
such that no additional dial
tone is needed on voip call.