Filter
Top Products
MultiVOIP User Guide Technical Configuration (Analog)
218
“Logs” Screen Definitions
Field Name Values Description
Enable
Console
Messages
Y/N Allows MultiVOIP debugging messages
to be read via a basic terminal program
like HyperTerminal ™ or equivalent.
Normally, this should be disabled
because it uses MultiVOIP processing
resources. Console messages are meant
for tech support personnel.
Turn Off Logs Y/N Check to disable log reporting function.
Logs Buttons Only one of these three log reporting
methods, GUI, SMTP, or SNMP, may be
chosen.
GUI Y/N User must view logs at the MultiVOIP
configuration program.
SNMP Y/N Log messages will be delivered to the
MultiVoipManager application program.
SMTP Y/N Log messages will be sent to user-
specified email address.
SysLog Server
Enable
Y/N This box must be checked if logging is to
be done in conjunction with a SysLog
Server program. For more on SysLog
Server, see Operation & Maintenance
chapter.
IP Address
n.n.n.n
for n=
0-255
IP address of computer, connected to
voip network, on which SysLog Server
program is running.
Port 514
Logical port for SysLog Server. 514 is
commonly used.
Online
Statistics
Updation
Interval
integer Set the interval (in seconds) at which
logging information will be updated.