Filter
Top Products
MultiVOIP User Guide Operation and Maintenance
365
4. The Password screen will appear. If you intend to use the FTP Server
function that is built into the MultiVOIP, enter a user name. (A User
Name is not needed to access the local Windows GUI, the web
browser GUI, or the commands in the Program group.) Type your
password in the Password field of the Password screen. Type this
same password again in the Confirm Password field to verify the
password you have chosen.
NOTE: Be sure to write down your password in a convenient but
secure place. If the password is forgotten, contact
MultiTech Technical Support for advice.
Click OK.
5. A message will appear indicating that a password has been set
successfully.
After the password has been set successfully, the MultiVOIP will re-
boot itself and, in so doing, its BOOT LED will light up.