Filter
Top Products
Operation and Maintenance MultiVOIP User Guide
348
MultiVOIP Program Menu (cont’d)
Menu Selection Description
Download Factory Defaults Select this to return the configuration
parameters to the original factory
values.
Download Firmware Select this to download new versions
of firmware as enhancements become
available.
Download User Defaults To be used after a full set of parameter
values, values specified by the user,
have been saved (using Save Setup).
This command loads the saved user
defaults into the MultiVOIP.
Set Password Select this to create a password for
access to the MultiVOIP software
programs (Program group commands,
Windows GUI, web browser GUI, &
FTP server). Only the FTP Server
function requires a password for access.
The FTP Server function also requires
that a UserName be established along
with the password.
Uninstall Select this to uninstall the MultiVOIP
software (most, but not all components
are removed from computer when this
command is invoked).
Upgrade Software Loads firmware (including H.323
stack) and factory default settings from
the controller PC to the MultiVOIP
unit.
“Downloading” here refers to transferring program files from the PC to
the nonvolatile “flash” memory of the MultiVOIP. Such transfers are
made via the PC’s serial port. This can be understood as a “download”
from the perspective of the MultiVOIP unit.
When new versions of the MultiVoip software become available, they
will be posted on MultiTech’s web or FTP sites. Although transferring
updated program files from the MultiTech web/FTP site to the user’s
PC can generally be considered a download (from the perspective of
the PC), this type of download cannot be initiated from the MultiVoip
software’s Program menu command set.